printable version
Removing and installing interior door trim panel
Models with sedan and wagon
| - Turn off the door lock button from the top panel and fully lift the glass door.
- Release the latch on a plastic box window handle, slide it to the handle and remove the (only for doors with mechanical lifter).
- Note the position of the handle and remove it along with the cover plate (only for doors with mechanical lifter).
- Pull out of the slot and remove facing the inside door handle. At the door, disconnect the power window switch.
- Remove the frame (one screw), then turn the upper screw fastening the armrest.
- Remove lower fastening screws and remove the armrest.
- Remove the two screws and remove the liner lock.
- On the back of the door, remove the ashtray, lift and remove the emphasis nest ashtray.
- Use a screwdriver with a wide blade, disconnect the trim panel from the door. Insert a screwdriver about latches to avoid damaging the upholstery.
- Remove the trim panel from the upper latch and remove it from the door. At the front door, disconnect the internal hook and rear - release latch near the ashtray.
|
|
Models coupe
| - Remove the screws and remove the cover from the end of the door of the castle and a small trim.
- Depending on the release latch on the plastic insert handle window, relegating it to the hilt, and remove.
- When lifted the glass doors mark the position of the window handle, then remove it along with the cover plate (only for doors with mechanical lifter).
- Remove facing locking lever (one screw).
- Remove the inside door handle trim, remove the screw and remove the frame.
- Remove the mounting screws and remove the armrest.
- Use a screwdriver with a wide blade, disconnect the trim panel from the door by inserting a screwdriver near the latches to avoid damaging the upholstery. It is necessary to release the panel from the front edge of the additional latches.
- Remove the rear edge of the panel latches, while freeing it from the lock lever.
- Lift the front of the panel to release it from the inside of the hook and remove the door.
|
|
All models
| - If necessary, carefully remove the plastic apron door, trying not to tear it.
- Install in reverse order, placing the latch in the correct position before installing the trim panel.
|
|
|