printable version
Removal and installation of the external handle of the front door
Models with sedan and wagon
| - Remove the rubber plug from the end of the door and remove the two Phillips screws.
- Apply the door handle forward, press the lever and remove the handle assembly.
- Before installation screw the front handle mounting screws, nedovernuv them about the thickness of the sheet metal door.
- Click on the handle and insert the knob so that the pull off the castle came to the castle. If necessary, tighten the front screw and adjust the value of the gap (1.0 mm) of the drive pin with the Allen key.
- Tighten the rear screws and put the rubber stopper.
|
|
Models coupe Operation for removing and installing the same as those described above, except that for access to the rear fastening screws necessary to remove the upper part of the door trim and remove the seal.
|