- Remove the lock striker (two screws) and remove the pins.
- Remove the lamp lighting and undock the connector wiring.
- Remove the glove box from the instrument panel.
- Remove the Phillips screws from the cover of the box, remove the crown nuts.
- Put in a vertical position the locking pin on the outer edge of the cover and remove the retaining bracket. Since the locking pin has a stopper on the one hand, it if it is not removed, it is necessary to rotate by 180 ?�.
- Lift the inner cover and remove the outer cover, then remove the inner cover and retaining bracket.
- If necessary, the lock can be removed by squeezing his fists forceps. At the top end of the castle there is a label ?�oben?� (top).
- Installation is the reverse order of removal.
|
|