Remove the interior door trim and a plastic apron.
Lower the window and disconnect the wire from the negative terminal of the battery.
Unscrew the guide window to the grooves.
Raise the window and prop up his wooden block.
Mark the position of the electric wires and disconnect them from the terminal.
On the back of the door, unscrew the mounting rear glass run channel and apply the groove forward.
Remove the bolts and nuts and remove the windows with the drive through a window frame of the door.
Install in reverse order of removal. At the same time, if necessary, you can adjust the course of lowering the glass by loosening the bolt and changing the position of the stop on the lever window.