printable version
Removing and installing rear lid
Withdrawal
| - Remove both lamps lighting the license plate.
- Remove the lamp and the light switch luggage.
- If you have disconnected the battery release fastening wiring and pull it out of the trunk lid.
- Enclose pieces of cloth under the corners of the trunk lid.
- Select the pencil hinge bolts and then unscrew the screws a few turns.
- With the help of an assistant, remove the hinge bolts, and supporting the trunk lid, remove it from the vehicle.
|
|
Setting
Install in reverse order, placing the bolts in the previously marked position before tightening them. The boot lid must be centered on the aperture and is in the correct position relative to the surrounding parts of the body. The trunk lid should fit snugly against the seal. If necessary, adjust the position of the cover in the opening by loosening the bolts hinges. Fit the seal cover is governed by the selection of shims under lock striker. | Lock lid lock |
|