printable version
Removal and installation of seat
The driver's seat
| - Lift the seat to the highest position and slide it forward to the limit.
- Disconnect the return spring.
- Remove the bolt and pull the sled.
- Remove the rear bolts slide.
- Depending on the models sedan with no seat height adjustment, loosen the bolts of the side brackets.
- Lower the seat to its lowest position and push it to the limit before.
- Remove the front screws and slide models with body coupe disconnect the vacuum tube of the automatic lock.
- Remove the seat from the vehicle.
- Installation of seats is made in reverse order of removal.
|
|
The front passenger seat | - Slide the seat to the forward position, loosen the bolt and slide the slide.
- Remove the two bolts of the side bracket.
- Move the seat to the rearmost position, loosen the front carriage bolts and remove the seat from the vehicle.
- Installation of seats is made in reverse order of removal.
|
|
Cushion and back rest (model sedan) | - Press the safety catch and remove the seat cushion (armrest is in the folded position).
- Remove the lower bolts of the seat back, put the arm in the working position and remove the central lower bolt.
- Remove the back, giving her up to release from the upper anchorage.
- Installation of seats is made in reverse order of removal.
|
|
Cushion and back rest (model station wagon) | - Press down on the knob lock and fold the seat cushion forward.
- Press the safety catches and remove the seat cushion.
- Remove the plastic cover, unscrew the bolts and remove the back seat of the car.
- Installation is the reverse order of removal.
|
|
|