REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
			The petrol engine of 1.4 and 1.6 liters
			The petrol engine of 2.0 liters
			Diesel engine
				Specifications
				Toothed belt
				Replacing cylinder head gasket
				Valves
				Replacing the valve stem seal
				Checking the valve guides
				Lapping valve seat
				Processing cylinder head / valve
				Checking / adjusting valve clearance
				Compression Test
				V-belt
				Faults Engine
				Engine lubrication system
				Oil circuit
				Removing and installing sump
				Oil pump
				Cooling system
				Injection Device
				Spark plug
				Power system
				Check / replacement of valve fuel cut
				No-load speed and the maximum speed
				Sprayers
				Start feeding high pressure fuel pump
				Operation in winter
				Technical data of the power of a diesel engine
				Helpful tips for owners of diesel car
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

Cooling system

Radiator

1. Expansion tank
2. Holder
3. Cover
4. Bracket
5. The upper radiator hose
6. Laying
7. The plug outlet
8. The rubber mount

9. The oil cooler hose
(not available in all versions)
10. Radiator
11. Lower radiator hose
12. Fan
13. Motor fan
14. Fan housing

Cooling pump

1. Pump cooling system
2. Pulley water pump
3. Flange thermostat (before assembling cover with liquid sealant, for example, Loctite)

4. The flange on the cylinder block
(before assembling cover with liquid sealant, for example, Loctite)
5. The flange pulley

The volume of the cooling system	7,1 l
Position vent plugs and drain holes on the diesel engine:
- Drain plug on the engine	Left Front, 70 Nm
- Vent tube	the left front of the intake manifold
Thermostat diesel engine
A warning Starting time may vary depending on the type of thermostat.
Start of opening	88 ?� C
The end of the opening	100 ?� C
Switch
Fitting thermal switch	coolant in the pipe, which is attached to the lower radiator hose (although for different modifications are possible options)
Temperature inclusion temovyklyuchatelya	90 ?� C
Off temperature temovyklyuchatelya	88 ?� C

« previos page
Oil pump