REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Sunny
		Instructions
		Maintenance
		Engines
			The petrol engine of 1.4 and 1.6 liters
			The petrol engine of 2.0 liters
			Diesel engine
				Specifications
				Toothed belt
				Replacing cylinder head gasket
				Valves
				Replacing the valve stem seal
				Checking the valve guides
				Lapping valve seat
				Processing cylinder head / valve
				Checking / adjusting valve clearance
				Compression Test
				V-belt
				Faults Engine
				Engine lubrication system
				Oil circuit
				Removing and installing sump
				Oil pump
				Cooling system
				Injection Device
				Spark plug
				Power system
				Check / replacement of valve fuel cut
				No-load speed and the maximum speed
				Sprayers
				Start feeding high pressure fuel pump
				Operation in winter
				Technical data of the power of a diesel engine
				Helpful tips for owners of diesel car
		Cooling
		Heating and ventilation system
		Fuel and exhaust system
		The system of the engine is started
		Coupling
		Transmissions
		Axles
		Brakes
		Suspension and steering
		Body
		Electrical

printable version

Oil circuit

A warning

Diesel engines are equipped with an additional oil nozzles, which spray the oil flow at the bottom of the piston, for the purpose of cooling.

Checking oil pressure

Engine	The number of revolutions / min when testing
Engine	Idling	2000
2.0 liter Diesel	0.6	thirty

A warning

The values refer to the oil pressure engine oil grade SAE 20W-20 with a temperature of 80 ?�. If other temperature or viscosity of the test results may be slightly different from the required values. For very large deviation should be checked for leaks oil lines and the oil pump.

« previos page
Engine lubrication system

next page »
Removing and installing sump