printable version
Power-steering pump and installation -snyatie
1. The pump and tank are changing together. 2. Loosen the lock nut of a roller belt and loosen the belt by turning the screw counter-clockwise, remove the belt 3. Loosen, but do not disconnect the hose from the pump. 4. Lift the pump with tank, substitute tray completely disconnect the hoses and drain the liquid. Stop the hoses. 5. If necessary, remove the standard pulley puller. 6. Installation is performed in reverse order. Before tightening the bolts, adjust the belt tension. Fill the reservoir with fluid and remove air.
|