 printable version
Spring rear suspension - Removal and installation
1. Raise the rear of the vehicle and axle stands under the frame. 2. Lift the rear axle jack is matched under the gear case. 3. Loosen the nuts and remove the shock absorbers with lower pins (photo). 4. Gently lower the rear axle to a complete discharge of the springs. 5. Remove the spring and the cup. Inspect the cup, if damage is found, replace.
| 11.2 Unscrewing nuts drafts of the stabilizer 1 Link
|
| 9.6 Painted on a spring band and the label on the bottom of the well should be directed towards the rear of the car 1. Top 2. Spring 3. Lower the cup 4. Orientation tag 5. To the rear of the vehicle
|
6. Installation is performed in reverse order. When installing orient the spring so that the mark has been directed toward the rear of the car (see photo). Nuts tighten the shock absorbers after lowering the car on wheels.
| 
