printable version
Wheel studs - Replacement
1. Raise the vehicle. 2. Remove the wheel 3. Remove the brake caliper and the disc: 4. The front-wheel hub separate from the disk. 5. Screw the nut remover and press out pin (pin, set to 5 or 7 hours). 6. Remove the nut and remove the pin. 7. Insert a new pin, so that the teeth match the teeth in the hole. 8. Put 4 washers, tighten the nut. 9. Tighten the nut so that the bolt stops at the back of the nave, unscrew the nut and washers. 10. Install all the parts in reverse order. Establish a wheel and lower the car.
|