add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Terrano II (from 1985 to 1999 model year)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Terrano 2
Home
 
Nissan
Terrano 2
Operation and Maintenance
Maintenance Vehicle
The four-cylinder engine
Engines VS
All engines
Systems of cooling, heating, ventilation and air conditioning
Fuel and an exhaust system
The system of electric motor
Emission of exhaust gases
Manual transmission
Automatic Transmission
Coupling the propeller shaft and rear axle
Chassis car with wheel formula 4x4
Brakes
Suspension and steering
Technical data
Overview
Wheel studs - Replacement
Stabilizer - removal and installation
Shock absorbers - removal and installation
Torsion - removal and installation
Bars and streamers suspension - Removal and installation
The upper arm and ball joint and install -snyatie
The lower arm and ball joint and install -snyatie
Spring rear suspension - Removal and installation
Rods rear suspension - Removal
Stabilizer rear axle - Removal and installation
Steering - general information
Steering wheel - removal and installation
Steering lock -snyatie and installation
Steering gear - removal and installation
Steering gear (a / m without power steering) - dismantling
Steering
Power-steering pump and installation -snyatie
Removal of air from hydraulic drive wheel
Steering Linkage - removal and installation
The front axle -General information
Wheels and tires - general information
Body and trims
Electrical system
 


Hit Counter by Digits


print page printable version

Technical data



Front suspension
Adjusting data
cm. Text
Dimension G
On rear-wheel drive and / m
6-18 mm
On all-wheel drive and / m
50-60 mm
L Size
On rear-wheel drive and / m
49 mm
On all-wheel drive and / m
77 mm
Size H (swing arm suspension)
On rear-wheel drive and / m
108-118 mm
On all-wheel drive and / m
41-51 mm
Dimensions A and B to the axis of the upper arm
110 and 32 mm (respectively)

Torque (Nm)
Fixing the upper support arm to the stub axle
72-130
Attaching to the upper support arm
15-18
Fixing the axis of the upper arm to the lever
63-87
Fixing the axis of the upper arm to the frame
97-130
Mount the lower leg to the frame
97-130
Mount the lower leg to the arm
43-55
Fixing the lower support arm to the stub axle
104-172
Fixing torsion arm to the lower arm
On rear-wheel drive and / m 144-61
On all-wheel drive and / m
internal
41-53
Outdoor
74-108
Attachment extensions to the lower arm
44-57
Attachment extensions to the frame
104-139
(ening the tension rod to the bottom lever
104-130
Mounting tension rod to the body
104-139

Rear suspension
Nut front axle springs
70-86
Nuts ladders spring
70-86
Bolts top and bottom bars (suspension with coil springs)
97-130
Bolts cross bar
From the left side
Before 1990
44-63
Since 1991
114-150
On the right side
97-130

Steering
Without power steering
axial play shaft 0.01-0.03 mm bipod
Shim thickness (mm)
1,575-1,600

1,550-1,575

1,525-1,550

1,500-1,525

1,475-1,500

1,450-1,475

1.95

2.00

2.05

Preload in the bearings of the steering mechanism (drag torque-rotation pinion gear)
New items
0,83-1,23 Nm
Items Used
0,59-0,98 Nm
Standard length of the side steering rod
On rear-wheel drive and / m
344 mm
On all-wheel drive and / m
281 mm

Torque (Nm)
Nut steering
26-35
Holder column cover
7,8-13
Tightening the screws of the worm shaft
22-26
Nuts tips of steering drafts
50-86
Nuts clamps rods
Before 1990
12-17
Since 1991
10-12
Lock nut steering rod
72-86
Bolts idler arm bracket to the frame
Before 1990
44-63
Since 1991
48-63
Nut idler arm
48-63
Bolts of fastening of the steering gear to the frame
74-85
Nut steering pitman
Without power steering
Before 1990
120-130
Since 1991, the
210-250
With the hydraulic booster
124-160




« previos page
Suspension and steering
next page »
Overview

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.