printable version
Shock absorbers - removal and installation
Front shock absorbers 1. Remove the wheel, lift the front of the vehicle. 2. Remove the stem nut, remove the washer and bushing (photo). 3. Remove the nut and get a coupling bolt (Fota). 4. Installation is carried out in reverse order. The head of the lower bolt should face forward in the course of the vehicle.
| 1.3 Details of the rear suspension of the car "Pathfinder" 1. Reference cup spring rod 2. 3. 4. Shock Rod Rod 5. Spring 6. Longitudinal stabilizer bar 7. 8. 9. Link stabilizer to the front of the vehicle |
| 3.3 Before you unscrew the nut thrust mark ztilki, washers and gshokladki |
| 3.5 stabilizer bracket bolts. |
Rear shock absorbers 5. Lift the rear of the car for the axle beam and set on a secure base. 6. Remove the nut to the shock absorber lower mounting bracket bridge (photo). 7. Remove the upper shock absorber nut and remove the shock absorber (photo) 8. Set the dampers in the same manner, finally tighten nuts after lowering the vehicle to its wheels.
|