 printable version
Adjusting using electric
| By means of the switches A and B can adjust the seat position using the drive.
Regulation is carried out also with the ignition off.
With handwheel With mechanical adjustment is made of backwater in the lumbar region. |
A warning  For security reasons, you need to adjust the seat height only when the vehicle is stationary.
Be careful when adjusting the seat! When carelessness or negligence can get bruised.
The electric seat adjustment also operates with the ignition off and remove the ignition key. Therefore, children should never be left alone in the car without adult supervision.
A SWITCH
| The seat position is adjusted by pressing the switch in the direction of the arrow.
1 - the seat forward / backward
2 - the front of the seat up / down
3 - the rear of the seat up / down
2 and 3 simultaneously - seat height adjustment |
SWITCH
| The position of the seat back is adjusted by pressing the switch in the direction of the arrow.
At the direction of the arrow 1 - increasing the angle of the backrest.
In the direction of arrows 2 - decreasing the tilt angle of the backrest. |
A warning During the movement of the seatback must not be tilted too far back, as otherwise the effectiveness of seat belts reduced.
| 
