 printable version
The bottom cover of the engine compartment
A warning  When removing and installing do not damage the surface of the protective material covers.
Withdrawal
| PERFORMANCE ORDER | | 1. Raise the vehicle. |  | 2. Remove the front cover (1), remove the four bolts (arrows). | | 3. Remove the rear cover (2) by removing the eight bolts. If necessary, remove the side trim on the left and the right, respectively, by unscrewing two screws on the side trim to the spar and one bolt to the lower support arm independent suspension. |
|
Setting
| PERFORMANCE ORDER | | 1. After removing the set side trim and fix bolts. | | 2. Install the rear trim and fix bolts. |  | 3. Set the front casing so that the groove in front went into the side of the partition panel (3). |  | 4. Press the front cover (1) upwards, wherein the edge side of the casing (3) should be top panels (1). | | 5. Tighten the front casing. | | 6. Lower the car to the ground. |
|
|
