printable version
Adjusting headlamp
1. Control headlight adjustment must be set to "0". 2. The adjusting screws are located in the engine compartment. 3. Turn on the ignition and dipped beam.
| Fig. 9.23. Headlight adjustment screws: 1 - the lateral adjustment screw; 2 - the height adjustment screw
|
4. First, the rotation of the screw height adjustment (closer to the outer side of the vehicle) until to the spot light beam its horizontal light-dark boundary coincides with the line E (Fig. 9.23). 5. Turn the adjustment screw side (closer to the inner side of the car) until that breakpoint of the light spot beam headlamps adjusting accounted for just under crosses. Thus the beam may be located at break of 15% above the line. 6. When setting is automatically set and the high beam.
|