 printable version
Replacing the lamp fog lamp
| Fig. 9.20. After the opening of the two rotary holders allows access to the rear fog lamp: 1 - a cover; 2 - Clip the lamp housing; 3 - a cover of the lamp housing
|
1. The bottom of the bumper at the level of fog open the cover. To do this, pull the two rotary holder so that the lid fell down (Fig. 9.20). 2. Click on the clip on the lamp housing and remove the cover. 3. Release the lamp from a hook clamp and remove the plug from the bulb. 4. Remove the bulb. 5. Install the new lamp so that its base is clearly entered into the cartridge.
Timely replacement of incandescent light bulbs Mild burning lamp indicates that its bulb is very dirty. This occurs most often with the lamp lighting the license plate. In this case, the lamp should be replaced. If, after a long life of the lamp burns out, replace it at the same time of trouble on the other side: experience shows that it is too soon fail.
| 
