If the fault indicator relay

Failure of the direction indicators at the driver appear serious problems, especially when driving in heavy traffic, or transportation in the dark. If the cause of failure in the relay, the next possible emergency method of solving problems.

1. blinker is on board relay in the fuse box.

2. Slightly turning in different directions, remove the relay from the board.

3. Place a jumper between terminals "30" and "87" (marked on the relay). To do this in front of the respective relay terminals insert a paper clip or segment of a thin wire.

4. In this state, when the direction shift paddles, the lamp on the corresponding side of the car will burn continuously.

5. Switch on and off indicators shift paddles, you can achieve the desired flashing signal.