printable version
Replacing the front direction indicators
1. Open the hood. 2. At the top of the daytime running lights, turn left (counter-clockwise) direction indicator bulb holder, and then remove the lamp housing.
| Fig. 9.30. Installed front turn signal lamp shall be yellow, otherwise the signal will be white
|
3. The bulb in the socket, press down slightly, turn to the left and out of the cartridge (Fig. 9.30). 4. Insert the new lamp cartridge, turn to the right until it snaps into place. 5. Insert the cartridge into the housing up to the stop lights and turn right.
PRACTICAL ADVICE Checking the light signal With the ignition on, press stalk dimmer. It should illuminate the main beam headlights and the corresponding indicator lamp. If the signal light is not working, but when the lights are lit, you should first check the voltage on the wire of the main switch. If the voltage is, the faulty steering column switch. |
|