Adjusting the brake pedal

1. Peel back the carpet and the insulation panel overlay floor. When fully released pedal of a foot brake, measure the distance from the surface of the rubber pad pads pedal to the floor.

2. Compare result of measurement to requirements of Specifications. If necessary, make appropriate adjustments (see., Etc.).

3. Loosen the lock nut behind the split pin pusher of the vacuum brake booster.

4. Turn the push rod Achieve the desired result.
5. Tighten the locknut.
6. After finishing the adjustment, check the amount of pedal free travel.

1. Lightly press the pedal down and measure the value of its course until the emergence of resistance to squeezing. Compare result of measurement to requirements of Specifications, in case of need make corresponding updating.

2. Loosen the lock nut split pin pusher of the vacuum amplifier.
3. Turn the stem Achieve the desired result.
4. Tighten the locknut.

1. With the engine running, fully depress the brake pedal and measure the distance from the surface of the rubber lining of her shoes to the floor.
2. If the height of the pedal is depressed below the limit (see. Specifications), check the brake system for signs of leaks or mechanical damage to the components.