| Fuel | Unleaded gasoline is not worse AI95 |
| Engine oil: |
| Type | Universal motor oil for gasoline engines certified to API |
| Viscosity | See. Map of viscosities in the illustration |
| Transmission Fluid AT | ATF type Nissan-Matic "D" |
| Transmission Manual transmission oil | Gear oil API GL-4 80W-90 |
| brake fluid | DOT 3 |
| Liquid hydrostrengthening steering system | ATF DEXRON III |
| Grease for wheel bearings | Lithium grease NLGI ?�� 2 |
| Coolant | (50 ÷ 70)% solution of antifreeze based on ethylene glycol with water |
| Volumes of working liquids, L * |
| Fuel tank capacity | 70 |
| Engine oil (including the oil filter) |
| Models 1993 and 1994 Vol. | 3.9 |
| Models from 1995 MY. | 4.0 |
| Coolant |
| Models 1993 and 1994 Vol. | 8.27 |
| Models from 1995 MY. | 8.5 |
| Transmission Fluid AT | The best way to determine the required number when changing ATF fresh fluid is drained from the measurement of the transmission ATF |
| Transmission Manual transmission oil |
| Models 1993 and 1994 Vol. | 4.2 - 4.5 |
| Models from 1995 MY. | 4.5 - 4.8 |
| All volumes are shown only approximately. When adjusting the level check with the labels. |
| Ignition system |
| Spark plug: |
| Models 1993 and 1994 Vol. |
| Type | NGK BKR5ES-11, or equivalent in performance |
| Electrode gap, mm | 1.0 -1.1 |
| Models from 1995 MY. |
| Type | NGK PFR5G-11, or equivalent in performance |
| Electrode gap, mm | eleven |
| The resistance spark plug wires, Ohm / dm | Not more than 3033 |
| Ignition order | 1-2-3-4-5-6 |
 | Arrangement of cylinders and direction of rotation of the distributor of ignition (models 1993 and 1994 vol. - Models from 1995 vol. Used ignition system without a distributor) |
|
| Adjust the valve clearances on the cold engine (models from 1995 MY.) |
| Intake valves, mm | 0.254 - 0.330 |
| The exhaust valves | 0.279 - 0.381 |
| brake system |
| Minimum permissible thickness of the friction linings disc brake pads, mm | 1.59 |
| Adjusting the parking brake | 10 - 11 clicks of a ratchet |
| Suspension and steering |
| Maximum allowable steering wheel up, mm | 30.16 |
| Permissible slack landing ball bearings, mm | 0 |
| Efforts of a tightening of carving connections | Nm |
| AT crankcase drain plug | 29.8 - 39.3 |
| Sump bolts AT | 7.0 - 8.9 |
| Drain plug crankcase | 29.8 - 39.3 |
| Manual transmission crankcase drain plug | 24.4 - 33.9 |
| Spark plug | 18.9 - 29.8 |
| Wheel nuts | 97.6 - 118.0 |
