add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Maxima QX (1993 release)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Maxima QX
Home
 
Nissan
Maxima QX
Introduction
Operating Instructions
Adjustment and routine maintenance
Engine
System of cooling, heating
The power supply system and release
Electric motor
Engine Control Systems
Transmission
Coupling and power shafts
Brakes
Suspension and steering
general information
Removal, check of a condition and installation of the front suspension mount assembly
Replacing strut / coil spring assembly rack
Removal and installation of assemblage of a rotary fist with a nave
Removal and installation of assemblage of the front wheel bearing hub
Removing and installing front stabilizer bar
Removal and installation of the control lever front suspension
Replacing the ball bearings
Removal, check of a condition and installation of the rear suspension struts
Removal and installation of assemblage of the rear hub with wheel bearing
Removing and installing rear rod stabilizer bar (models 1993 and 1994 issue.)
Removing and installing the rear suspension arm (models 1993 and 1994 issue.)
Removal and installation of components of the rear suspension models from 1995 MY.
Removing and installing steering wheel
Removal and installation of tips of steering drafts
Replacement of protective covers of the steering mechanism assembly
Removing, dismantling and installation of the rack and pinion
Removing and installing the steering pump
Removal of air from a hydraulic path of system of strengthening of helm
Replacing the wheel studs
Wheels and tires - general information
Wheel alignment
Body
Onboard electric
 


Hit Counter by Digits


print page printable version

Suspension and steering



Specifications

Common parameters

Front suspension

Type Independent, type McPherson
Color-coded screw springs
Models with Manual transmission
Right side X x Red Orange Orange
Left side Red x Green x Green
Models AT
Right side Red x Green x Green
Left side X x Green Magenta Magenta
The diameter of the rod helical springs rack assemblies, mm 13.4 ÷ 13.7
The outer diameter of the spring coils, mm 160
Free length of the spring, mm 398 ÷ 418
Rigidity helical spring kgf / mm 20
The diameter of the piston rod of the shock absorber, mm 22
Bore mm 32
The damping force of the shock absorber (at 0.3 m / s), kgf
Stretching 93.2
Compression 27.5 ÷ 43.2
Maximum permissible axial play of the wheel bearing, mm 0.05
Diameter anti-roll bar, mm 31.8
Color-coded stabilizer bar Red
Torque the lower ball joint, Nm 0.49 ÷ 3.43
Permissible vertical clearance lower ball joint, mm 0
Type SHRUS
Internal DS90
Outdoor ZF100
The diameter of the CV joints, mm 28
Grease type SHRUS Branded lubricant Nissan
The amount of lubricant in the joint, g
Inner CV Joints 160 ÷ 180
The outer CV joint 205 ÷ 225
Rear suspension
Type Multi-link beam zaddnyaya
Color-coded screw springs
Right side X x Yellow Grey Green
Left side X x Blue Grey Green
The diameter of the rod helical springs rack assemblies, mm 12.1
The outer diameter of the spring coils, mm 91.1 ÷ 100.7
Free length of the spring, mm 300
The diameter of the piston rod of the shock absorber, mm 12.5
The damping force of the shock absorber (at 0.3 m / s), kgf
Stretching 93.2
Compression 53.9
Maximum permissible axial play of the wheel bearing, mm 0.05
Steering
Type Rack and pinion with power and variable gain value as a function of vehicle speed
Type of steering gear
Model
from 1993 and 1994 Vol. PR26SC with power
1995 MY. PR26AC / PR26AE with power
Gear ratio
PR26SC 1: 18.7
PR26AC / PR26AE 1: 18.1
The number of turns of the steering wheel (from lock to lock)
PR26SC 3.2
PR26AC / PR26AE 3.1
Maximum permissible axial play of the steering wheel (all models), mm 0
The maximum allowable radial play of the steering wheel (all models), mm 35
The length of the column "L", mm

The length of the steering column (model PR26SC)

The length of the steering column (model PR26AC / PR26AE)

PR26SC 581.0 ÷ 582.8
PR26AC / PR26AE 525.9 ÷ 528.1
Type of hydraulic fluid PAS See. Chapter Settings and maintenance
The standard length of the steering rod (L), mm 202.7

* l = 172 mm - measuring point

The stroke of the rack "S", mm 70.5
Efforts of a tightening of carving connections Nm
Front suspension
Nuts of fastening the ball joint to the control lever (models 1993 and 1994 issue.) 76 ÷ 109
Nut ball joint to knuckle
Models 1993 and 1994 Vol. 71 ÷ 86
Models from 1995 MY. 62 ÷ 76
Suspension Control Arm
Nut axial bolts
Models 1993 and 1994 Vol. 88 ÷ 118
Models from 1995 MY. 118 ÷ 147
Bolts collar / scarves / finger back plug (models 1993 and 1994 issue.) 118 ÷ 147
Bolts finger sleeves (models from 1995 MY.) 118 ÷ 147
Bolts clamp the rear hub (model since 1995 Issue.) 118 ÷ 147
Anti-roll bar
Nut rack to stabilizer bar
Models 1993 and 1994 Vol. 41 ÷ 51
Models from 1995 MY. 16 ÷ 22
Nut stabilizer to the control lever suspension
Models 1993 and 1994 Vol. 16 ÷ 22
Models from 1995 MY. 41 ÷ 47
Bolts fastening clamp rod stabilizer bar
Models 1993 and 1994 Vol. 31 ÷ 42
Models from 1995 MY. 49 ÷ 59
Rack assembly
Bolts / nuts to knuckle rack
Models 1993 and 1994 Vol. 157 ÷ 167
Models from 1995 MY. 140 ÷ 159
Nuts of the top support of a rack 39 ÷ 54
The nut of the piston rod damper
Models 1993 and 1994 Vol. 59 ÷ 78
Models from 1995 MY. 59 ÷ 88
Rear suspension
Models 1993 and 1994 Vol.
Bolts brake shield to the hub assembly (models with drum brakes rear wheels) 38 ÷ 52
Splash shield bolts disc brake 38 ÷ 52
Nut assembly hub wheel bearing 186 ÷ 255
Levers rear suspension
Wishbones
Nuts of fastening arm to the cross beam 88 ÷ 118
Nuts of fastening arm to the hub assembly 88 ÷ 118
Bolts / nuts at both ends of the trailing arm suspension 88 ÷ 118
Bolts of fastening of the longitudinal arm
lever to the front suspension
59 ÷ 78
Anti-roll bar
Nuts fixing collar sleeve stabilizer 31 ÷ 42
Nuts of fastening of the stabilizer to the chassis 41 ÷ 47
Stabilizer bar bolt to an arm trailing arm 59 ÷ 78
Rack assembly
The upper mounting nuts 42 ÷ 54
The nut of the piston rod damper 59 ÷ 78
Models from 1995 MY.
Rack assembly
The nut of the piston rod 18 ÷ 24
Nuts upper strut
Models from 1995 to 1998 Vol. 16 ÷ 19
Models 1999 Vol. 16 ÷ 22
The nut / bolt of the lower strut
Models from 1995 to 1998 Vol. 98 ÷ 118
Models 1999 Vol. 108 ÷ 127
Transverse torque rods and control rod
Nut jet bar to the rear axle assembly 98 ÷ 118
Bolt / Nut jet bar to the chassis 98 ÷ 118
Bolt / nut fastening rod to control torque arms
Models from 1995 to 1998 Vol. 59 ÷ 78
Models 1999 Vol. 79 ÷ 98
Nut control rod assembly to the rear axle 98 ÷ 118
Bolt / nut mounting the trailing arm to the chassis
Models from 1995 to 1998 Vol. 98 ÷ 118
Models 1999 Vol. 108 ÷ 127
Splash shield bolts disc brake 22 ÷ 29
Nut assembly hub wheel bearing 186 ÷ 255
Steering
Bolts of the airbag module (with heads of type TORX) 15 ÷ 25
Bolts and nuts of the support bracket of the steering mechanism 73 ÷ 97
Coupling bolt the steering shaft 24 ÷ 29
Nut steering wheel
Models from 1995 to 1998 Vol. 29 ÷ 39
Models 1999 Vol. 33 ÷ 39
Nut tie rod to the steering knuckle
Models 1993 and 1994 Vol. 29 ÷ 39
Models 1995 and 1996 Vol. 63 ÷ 73
Models from 1997 to 1999 Vol. 29 ÷ 39
Hollow bolt choke connector mounting pressure hydraulic line to the steering pump 69
d-1 Nut top support strut (39 ÷ 54 Nm)
D-2 Nut shock absorber piston rod (59 ÷ 78 Nm)
d-3 nut fastening clamp rod stabilizer bar (31 ÷ 42 Nm)
d-4 bolt clamp (31 ÷ 42 Nm)
d-5 Nut stabilizer to the bar (41 ÷ 47 Nm)
d-6 screws (118 ÷ 147 Nm)
d-7 Nut (88 ÷ 118 Nm)
D-8 Nut (16 ÷ 22 Nm)
Dr. Nut 9 (157 ÷ 167 Nm)
d-10 Bolt (54 ÷ 72 Nm)
d-11 Bolt (118 ÷ 147 Nm)
Dr. 12 castellated nut ball stud (71 ÷ 86 Nm)
d-13 Nut (76 ÷ 109 Nm)
d-14 Hub hook (235 ÷ 314 Nm)




« previos page
Check of serviceability of functioning and replacement of the gauge-switch of stoplights
next page »
general information

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.