 printable version
Body
Specifications
Body Geometry
Using sensors to obtain correct rolling of the wheels (the rear wheels should be strictly in the track of the front), - track correctness of installation of the sensors and the equality of lengths pointers.
If you use a roulette (preferably metal), make sure that it does not twist the measuring tape does not bend.
Image asterisk (*) after the value at the measurement point indicates that the second measurement point is located symmetrically with respect to said.
As the coordinates of the measuring points are the distances measured along three main directions ("X", "Y", "Z").
Location of the coordinate axes in the measurement of geometrical parameters of the car body
 | FR Forward
The left side LH
RH Starboard
"XX" center plane of the car
"YY" the vertical plane passing through the axis of the front wheels of the car
"ZZ" Main plane |
Measuring points
 | Mark the center of the front edge of opening the engine compartment |
 | The upper radiator central support |
 | The left rear corner of the engine compartment opening |
 | The front spar |
 | Suspension strut and the front spar |
 | The front spar |
 | The upper radiator support |
 | Panel Rack |
The geometry of the engine compartment models 1993 and 1994 Vol.
The support base of the radiator (front) and front suspension (located below the previous) and the front spar (near the center)
The rear and central elements
The geometry of the engine compartment models 1995 Vol.
Measuring points
 | The upper radiator central support |
 | The upper side of the radiator support, front spar of the lid, domed label |
 | The outer side of the engine compartment opening |
 | The center and the lower edge of the radiator |
 | The support strut and the front spar (left side) |
 | The front spar |
 | The upper radiator central support |
 | Right front spar |
The geometry of the body elements of the bottom models from 1995 MY.
Coordinates
A and
X: 330
Y: -710
Z: 188.8 B, b
X: 513
Y: -540
Z: 322 C, c
X: 450
Y: 68
Z: 184 D, d
X: 441
Y: 354
Z: 111.5 E, e
X: 600
Y: 430
Z: 154.9 F, f
X: 412
Y: 700
Z: 109 G, g
X: 414.5
Y: 1.210
Z: 108.4 H, h
X: 412
Y: 1.625
Z: 104 J, j
Hole installation rod suspension
X: 555
Y: 2.185
Z: 239.5 TO
X: 512
Y: 3.000
Z: 326.6 k
X: -544
Y: 2.982
Z: 328.2 L
X: 540
Y: 3.272
Z: 326.6 l
X: -575
Y: 3.280
Z: 326.6 M
X: 546
Y: 3.454
Z: 295.4 m
X: -570.5
Y: 3.450
Z: 326. The centers of the front and back of the upper supports of the suspension struts
Coordinates
N, n
X: 548.8
Y: 28.7
Z: 779.3 Oh, oh
X: 490.3
Y: 2.621
Z: 537.2
 | Front: N, n 87 Diam. Rear: Oh, about 61.4 Diam |
Mounting holes traction suspension
 | Element front suspension |
| 
