printable version

Nozzles

By pressing the appropriate keys out of all nozzles heated or unheated fresh air mode ("ECON") or cooling mode ("AUTO").

Management nozzles carried keys 1, 13, 14 (see. Fig. Controls air conditioning "Climatronic").

Additionally can be individually opened or closed nozzle 3 and 4:

Nozzle closed: dial on the side .
The nozzle is open: dial on the side .

By turning the common deflector array of nozzles 3 and 4, the air flow changes direction with height.

If rotated thumbwheel lattice deflector changes the direction of air flow in the horizontal plane.

The rear air nozzle in the footwell regulated with nozzles 5.

General information

Care should be taken so that the sensor is positioned between the air nozzles on the windshield in the middle of the front panel and grille deflector were not covered by anything.

To install "Climatronic" could function smoothly, the air intake in front of the windshield must be clean from ice, snow or leaves.

The heating capacity of the system depends on the temperature of the coolant of the engine, so the greatest heating occurs when at operating temperature engine.

If "AUTO" mode for a long time was not included, possible odor due to accumulation of various types of deposits on the evaporator.

To avoid unpleasant odors, should include climate control at the highest level of the fan - also during the cold season - at least once a month. In this short time to open one of the windows.

Used air is removed through outlets under the rear window. When holding items of clothing on the shelf luggage you must see to it that these holes are not blocked.

At high temperature and high humidity outdoor air may condensate dripping from the evaporator and the formation of puddles under the car. This is normal and is not an indication of leakage of the system.