printable version

Using installation

After turning on the ignition unit will operate normally in automatic mode. The display will show the fields 2, 3, 7 and 8 (see. Fig. Controls air conditioning "Climatronic").

The installation is fully automatically maintains the set temperature inside the car. To do this automatically change temperature in the cabin supply air blower speed (amount of air) and the distribution of the supply air.

There is an automatic adjustment of the unit in the amplification of solar radiation, which is why a manual re-adjustment is excessive heating.

If, before switching off the ignition were introduced some deviations from the standard setting automatic operation, re-define your installation are stored for a long time. Only 20 minutes after the ignition is switched off is erased from the memory of the previously defined recirculation mode.

Switching from system Celsius in Fahrenheit and vice versa

Press and hold down the key 17, and then press 9.

The display shows the measured temperature value in the corresponding system.