| 1. Open the hood. Remove the rubber seal (1) the catchment cavity until the middle bulkhead. Unscrew the 4 screws (2) and remove the cover. |
| 2. Press the two clips (A) in the direction of the arrow and remove the filter element upwards. |
| 3. Check that the extreme slats of the filter element (arrow) is correctly positioned in the frame. |
| 4. When inserting the new filter element Make sure that the first filter element has been retracted the tabs (1) in the recess under the filter slot. |
5. Push the filter down to the front locking lugs lock into the socket terminals. |
6. Firmly tighten the cover screws, and replace the rubber seal. |