 printable version
Checking the condition of seat belts
Checking the seat belt on the strand breaks or razlohmachivanie
A warning  It does not use the shoulder strap electrically from the emergency kit for child seats. Diagonal belt does not provide the necessary protection.
Belts, buckles and fastenings should be inspected periodically and verify their serviceability. If the belts are removed for any reason, it is necessary to ensure their correct installation.
A warning For trouble-free operation observe cleanliness tensioner seat belts. If damaged buckles or straps, replace the tensioner.
Belts, who had been a strong stretch in an accident, should be replaced.
When exposed to sunlight and chemicals ribbon belt loses its strength. With the loss of the original color (color fading) belt should be replaced.
Wash belts only in a mild soap solution. Before retracting the belts carefully them dry.
It is forbidden to handle the webbing belt chemical compounds, to tint them or discoloring. Lineups loosen the belt. Belt, discolored or weakened by chemical compounds, should be replaced.
Seat belts should always be changed in the set. Do not install the buckles and belt tensioners are not designed for this seat, or other cars.
| PERFORMANCE ORDER | | 1. Make sure that the straps are not twisted as a result of improper installation. If the belts are twisted or jammed to retract, then pull the belt on all length sufficient to ensure that it can straighten out. Then return the belt to its original position. | | 2. Fully pull the belt and release it fully involved. If the belt jams when moving in both directions, check its purity, the presence of braid dirt, grease and other foreign substances. The belt should be cleaned only mild soapy water. If the belt can not be rinsed with this solution, it should be replaced. | | 3. Check the condition of all places of fastening the belt. Bolts should be tightened. Remove any traces of corrosion in those places where the strap is attached to the body. Corroded fasteners replace. | 4. Replace the belt should also be detected include damage:
- Strand breaks or razlohmachivanie (see. Fig. Checking the seat belt on the strand breaks or razlohmachivanie)
- Cuts tabs on the edges of the belt,
- Curved braid,
- The presence of painted areas or cuts. | 5. The belt assembly must be replaced when you notice the following damages:
- Buckle the belt is not properly fixed,
- Release button belt loosened,
- Buckle the belt does not let go,
- Increase in the force required to release the belt,
- On the surface of the buckle is cracked. |
|
|
