printable version

Resetting Service-indicator

When the time comes for regular maintenance, the lower counter (the counter of daily run) speedometer lights up one of the following symbols of the desired type of maintenance: oil changes - service OEL or service Oil, Inspection service - service INSP.

Approximately one minute after the start of the engine disappears reading notation necessary maintenance.

Service company Volkswagen, which carries out maintenance after the work, using special equipment VAG-1551 sets the indicator of service to the home (zero) position.

If the maintenance was carried out not in the service enterprise a Volkswagen, service indicator should be set to the initial position in the following order.

Homing

PERFORMANCE ORDER

1. With the ignition off, press and hold the button, the reset (1) the speedometer (2 - an indicator of daily run). 2. Turn on the ignition and release the zeroing button only when the display shows the strokes - one of the images required type of service. If you re-press the reset button, then the indicator will switch to service mode service INSP. 3. The minute button to set the clock with digital display, turn right and on the clock to pull the arrow button display. The display shows the following indication "service -". 4. Turn off the ignition. A warning When the battery disconnected service-indicator readings after maintenance are saved. If the repair replaced necessary to reprogram the speedometer service-indicator. This operation must be carried out in the service enterprise a Volkswagen. If the service-indicator anew is not programmed, it is necessary to carry out maintenance work on a vehicle on the "Service Booklet", rather than the service-indicator.