printable version
Schedule maintenance
Replace engine oil. Replace the oil filter.
On vehicles with diesel engine drain the water from the fuel filter.
Check the exhaust pipe to the reliability of fastening, the absence of leaks and damage.
Control survey to check the engine for no leaks and damage.
On the diesel engine with direct injection (TDI or SDI) to check the wear of the toothed belt.
Check the coolant level and antifreeze concentration. If necessary, add a liquid or bring the concentration back to normal.
Display information from the memory control units all systems checks in self-test.
Check and adjust the engine speed to idle. The operation is performed only in a car with a diesel engine, naturally aspirated (except SDI), and provided that the period of the next test for toxicity of exhaust gases is yet to come.
Check the thickness of the front and rear brake linings.
Control survey to check the brake system for leaks and damage.
Check the brake fluid level matching the actual brake pad wear.
Control survey to check for the absence of leaks and damage the gearbox, main gear and protective covers universal joints.
Check the covers of constant velocity joints in the absence of leaks and damage.
Check the play in the Tie Rod End, as well as the reliability of their fastening and state covers.
Check the electrolyte level in the battery. If necessary, add distilled water.
Check tread depth and pattern of wear on all tires, including the spare wheel mounted on. Check and, if necessary, to bring back to normal tire pressure.
Lubricate locks doors and fixing fingers.
Check operation of the lights, direction indicators, hazard warning lights and the luggage compartment lamp.
Check operation of interior lighting and glove compartment, as well as the horn and warning lights.
Control survey to check the front air bags for external damage.
Check and adjustment of the system wipers, windscreen, headlamp cleaning system and headlight wipers (if any). If necessary, adjust the nozzle and pour the liquid in the tank filling system.
Check and, if necessary, adjust the brush unit in the starting position and the angular position of the wiper leashes.
Set to zero indication service indicator (if any).
Road tests the vehicle and perform a final inspection.
|