add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 / MX-6 (from 1982 to 1991, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 626 / MX-6
Home
 
Mazda
626 / MX-6
Operation of the vehicle
Adjustments and service tehnichkskoe
Overview
Maintenance intervals
Checking the technical condition and maintenance of the engine
Testing of tires and tire pressure
Check Fluid Levels
Inspection and maintenance of the battery
Check, adjustment of a tension and replacement drivers belts
Check the cooling system
Check and replacement of hoses
Inspection and replacement of wiper blades
Lubrication gear
Check exhaust system
Check suspension and steering
Check the brake system
Checking the position of the choke carburetor
Check and adjust the engine speed of the engine idling and the quality of the air-fuel mixture
Replace the oil filter and engine oil
Check the power supply system
Check the engine air intake temperature control
Check seals and protective covers of hinges of equal angular velocity drive shafts
Shift of wheels
Adjust the clutch pedal
Replacing the transmission oil in the mechanical gearbox
Replacing a working fluid in an automatic transmission
Substitution coolant
Adjustment and replacement of the rear wheel bearings
Replacing the air filter and filter crankcase ventilation (PCV)
Replacing oxygen sensors
Check and replacement of the valve of ventilation crankcase (PCV)
Check valve EGR (EGR)
Checking system EVAP
Ignition System Check
Adjusting valve clearance and check tightening torque of bolts fastening the cylinder head
Compression check in engine cylinders
Checking the fuel mixture depletion when coasting
Gas Engines
Diesel engine
System of cooling, heating and air conditioning
The power supply system of petrol engines
Ignition system
The system of emission control
Transmission
Brakes
Suspension and steering
Body
Electrical
The device, service and repair later releases
maintenance and repair of cars of release since 1986
Diagrams
 


Hit Counter by Digits


print page printable version

Check exhaust system



Check the exhaust system spend a few hours after stopping the engine.
For free access to raise the vehicle on a lift.
Check the pipes and their connections for leaks of exhaust gases, which testify to their corrosion or damage.
Check the condition of suspension brackets and exhaust system.
Inspect the bottom of the car there is no through-holes, corrosion, open seams, through which the interior of a car can enter the exhaust gases. Seal sealant all detected holes.
Make sure that the elements of the exhaust system were installed freely, without pressure, with sufficient clearance on the elements of the body.
Check the condition of the engine, inspecting the inside of the exhaust pipe. If the pipe is black and covered with black or white flakes, then you need to adjust the engine and inspect the power supply system.




« previos page
Lubrication gear
next page »
Check suspension and steering

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.