add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 / MX-6 (from 1982 to 1991, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 626 / MX-6
Home
 
Mazda
626 / MX-6
Operation of the vehicle
Adjustments and service tehnichkskoe
Overview
Maintenance intervals
Checking the technical condition and maintenance of the engine
Testing of tires and tire pressure
Check Fluid Levels
Inspection and maintenance of the battery
Check, adjustment of a tension and replacement drivers belts
Check the cooling system
Check and replacement of hoses
Inspection and replacement of wiper blades
Lubrication gear
Check exhaust system
Check suspension and steering
Check the brake system
Checking the position of the choke carburetor
Check and adjust the engine speed of the engine idling and the quality of the air-fuel mixture
Replace the oil filter and engine oil
Check the power supply system
Check the engine air intake temperature control
Check seals and protective covers of hinges of equal angular velocity drive shafts
Shift of wheels
Adjust the clutch pedal
Replacing the transmission oil in the mechanical gearbox
Replacing a working fluid in an automatic transmission
Substitution coolant
Adjustment and replacement of the rear wheel bearings
Replacing the air filter and filter crankcase ventilation (PCV)
Replacing oxygen sensors
Check and replacement of the valve of ventilation crankcase (PCV)
Check valve EGR (EGR)
Checking system EVAP
Ignition System Check
Adjusting valve clearance and check tightening torque of bolts fastening the cylinder head
Compression check in engine cylinders
Checking the fuel mixture depletion when coasting
Gas Engines
Diesel engine
System of cooling, heating and air conditioning
The power supply system of petrol engines
Ignition system
The system of emission control
Transmission
Brakes
Suspension and steering
Body
Electrical
The device, service and repair later releases
maintenance and repair of cars of release since 1986
Diagrams
 


Hit Counter by Digits


print page printable version

Checking the technical condition and maintenance of the engine



If the acquisition vehicle maintenance and inspection levels fluids held regularly, the engine will be in good condition and the need for additional services will be minimized.
However, it often happens that the engine is unstable due to lack of regular maintenance. This case is most likely when buying a used car, which is not serviced regularly. Therefore it is necessary, regardless of engine maintenance schedule routine maintenance.
The following are the operations that must be performed to restore the normal operation of the engine.
Clean, inspect and check the battery.
Check the level of all fluids.
Check the compression.
Check and adjust the belt tension.
Replace the spark plug.
Check the condition of the lid and rotor ignition distributor.
Check the condition of spark plugs and high-voltage wires.
Check and, if necessary, adjust the speed of the crankshaft of the engine idling and the quality of the air-fuel mixture.
Check and adjust the ignition timing.
Replace the fuel filter.
Check the crankcase ventilation valve PCV.
Check the condition of the cooling system.
In addition, perform the following operation.
Check the operation of the EGR EGR.
Check the operation of the ignition system.
Check the condition and service the battery.
Check the operation of the power system.




« previos page
Maintenance intervals
next page »
Testing of tires and tire pressure

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.