 printable version
Shift of wheels
To ensure the safety of the replacement or rearrangement of the wheels follow the following requirements: - Park the vehicle on a flat, dry area; - Brake the car parking brake, switch off the ignition; - Engage first gear or reverse gear (position "P" for automatic transmission); - Sheet under the wheel stops. In no case do not work under the vehicle, mounted on a jack (if necessary, install it on the support legs).
| Fig. 2.15. Permutation scheme with radial wheels (a) and diagonal (b) tires
|
Shift of wheels by the scheme shown in Fig. 2.15, in accordance with the schedule of maintenance or in case of uneven tire wear. Wheels on interchange must rotate in the same direction as before the reshuffle. If you also need to check the brake, do not set the parking brake. Make sure the wheels are locked with chocks to prevent movement of the vehicle. To replace the wheel is better to raise the entire car or lift jack to lift each side of the turn, and then lowered onto the stand beneath the beams of the chassis. Always use a four-stand and make sure that the car was secure. After moving the wheels, check the tire pressure, if necessary, finish it to norm. Check tightness of wheel nuts.
| 
