1. The correct position of the door opening in the touring car is of critical importance in terms of serviceability of functioning of the door assembly. The first step is to estimate the amount of movement of the door hinge axis fingers. Open the door, and tug it up and down. If the play exceeds 1.6 mm in the door hinges must be replaced.
2. To adjust the door position in the vertical direction to loosen the hinge bolts on the back of the car (access to some of the bolts is limited, so you may need a special key shape). The door can be considered established true when in the closed position, its upper edge is parallel to shear the roof of the car, and the bottom - line threshold
3. Align the door in the longitudinal direction is carried out by releasing bolts hinge brackets on the door frame - once again may need a special key. The front edge (rear door at the rear) door thus should be flush with the surface of the wing.
4. serviceability of operation of the locking mechanism can be achieved by adjusting the position of the striker lock in the vertical direction. To estimate the displacement of the base plate drummer circle marker. Loosen the hardware and make the necessary adjustments - the latch should engage the central part of the impactor.  | 5. Finally, adjust the position of drummer in the horizontal direction - the closed door should be provided flush with the rack / rear wing panel and regularly while locked. |
|
