 | The cover has a considerable weight, so it is wise to enlist the help of an assistant. |
1. Open the trunk and fix it firmly in the upper position. Cover the edges of the opening panel painted spats or old blankets.
2. Disconnect the electrical connectors, which prevents the dismantling of the cover.  | 3. Circle marker strips of the door hinge. |
4. Remove the hinge bolts to the cover and with the help of an assistant, remove the latter.
5. Install in the reverse order. Make sure that the looped straps have been planted in accordance with applied during the dismantling of labels.
6. When replacing the cover, close it and verify the correct placement of the opening in Touring Car.
7. Adjusting the door in the horizontal direction is made by loosening the bolts and hinge offset planks within stock ovality bolt holes therein. Adjust the position of the cover, be sure to tighten the fasteners.
8. To adjust the position of the cover in a vertical plane can use the shims, which puts a looped strap.  | 9. To adjust the height of the cover into the opening Touring Car loosen bolts assembly striker lock properly Adjust the position of the latter, then re-tighten the fasteners. | Before loosening the bolts to orient the circle base plate drummer marker. |
|
|
