Removal and installation of latches and lock cylinder cover luggage

1. Open the trunk lid. Hooking release buttons special tool, separate the bottom edge of the panel of an internal upholstery cover to provide access to the lock latch assembly. Remove the plastic decorative cover latch.
2. Circle the latch assembly marker.
3. Disconnect the wiring and CEO rod connecting the latch with a cylinder lock.

4. Turn out fixing bolts and remove the lock latch.

5. Install in the reverse order.

1. Open the trunk lid. Hooking release buttons special tool, separate the bottom edge of the panel of an internal upholstery cover to provide access to the lock latch assembly.

2. Through the technological hole, located near the right combination lamp assembly, release the executive stock Lock from its retainer and remove the mounting plate assembly castle. At a corresponding complete vehicle wiring disconnect from the activator lock.

3. Expand the lock at 45 ?� and remove the assembly from tailgate.
4. Install in the reverse order.