printable version
Check and replacement of the valve crankcase breather
1. Spool crankcase ventilation is screwed into the intake manifold and is connected by a hose to the cylinder block (photo). 2. New valve must fully correspond to the type of engine. 3. Remove the air filter 4. Disconnect the hose.
| 41.1 spool crankcase ventilation |
| 42.3a Check spark gap with the help of the caliber of round section |
| 42.4a Removing the tip wires using special pliers |
| 42.46 A new candle is recommended to wrap up with a hose |
5. Remove the spool and screw the new one. Attach the hose and install the air filter.
|