printable version
Check the initial position of the wiper arm
The initial position of the windscreen wiper blade
Starting position rear window wiper
Check and adjust the angle of the wiper arm
| 1 - a wrench;
2 - the wiper arm;
3 - tool VW 3358 |
Check the angle of the wiper arm PERFORMANCE ORDER | A warning Check the angle of the wiper arm must be carried out at a low efficiency of cleaning the glass, or when there is noise in the brush.
| 1. Turn on and off screen wipers, thus screen wiper levers will be established in a starting position. Remove the wiper blade. | 2. The wiper arm (1) into the tool HAZET 4851-1 or 3358 VW and screw (see. Fig. Check and adjust the angle of the wiper arm). | 3. If necessary, adjust, being careful wrench (1) rotate the tool VW 3358 up until the arrow points to the scale of the required value of ?� 2 ?�. | 4. Remove tool VW 3358, install and secure the wiper blade. |
|
Nominal values of the angles Driver's side | -8,5 ?� | On the passenger side | -1 | Rear window | 0 ?� |
|