add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Clarus
Home
 
Kia
Clarus
Maintenance
Engines FE DOHC and DOHC T8
Greasing system
Cooling
The power supply system and release
Fuel system
Ignition system
Coupling
Manual transmission
ACP G4A-EL
Technical data
Search and definition of malfunctions
The table of fast diagnostics
Self-diagnostic system
Fault codes
Diagnostic connector
Cleanup operation
Testing of teamwork of an automatic transmission and the engine for the motionless car
Testing time lag
Testing of pressure transmission fluid
Testing for the pressure reduced by the valve
Check of level and a liquid condition in an automatic transmission
Leaks of a liquid from an automatic transmission
The accelerator cable
Mode Switch
Brake light switch
The temperature sensor Transmission Fluid ATF
Check the resistance of the pulse generator
Solenoid valves
Removal of an automatic transmission
The general recommendations about transmission dismantling
Dismantling of an automatic transmission
Check and adjustment of preliminary loading of bearings
Assembling automatic transmission
Installation of an automatic transmission
Oil radiator
Disk Drive
Check of work and adjustment of position of the selector lever
Lever
Repair of the selector lever
AKP 50-40 LE
Axes and power shafts
Steering
Wheels and tires
Suspension
Body
The air conditioning system
Electrical equipment
Brakes
Electric schemes
 


Hit Counter by Digits


print page printable version

Fault codes



Code
Fault Location
Self-diagnosis
Resiliency
06
Vehicle Speed Sensor No input signal from the speed sensor when the vehicle speed and the drum 600 min -1 at positions D, S, or L Gear shifting is performed normally.
12
Throttle Position Sensor Open circuit in the accelerator pedal is depressed (the idle switch OFF) or misconfiguration. The opening of the throttle valve is estimated as 4/8. Blocking is not provided.
55
The pulse generator No input from the pulse generator at a speed of 40 km / h or higher at positions D, S, or L Gear shifting is performed in accordance with a signal from the vehicle speed sensor.
57
The switching signal transmission (automatic transmission control unit) Open circuit or short-circuit transistor control unit or automatic transmission wires. Gear shifting is performed normally.
60
Shift solenoid valve 1-2 Open circuit or short-circuit transistor control unit or automatic transmission wires e / m of the valve. The solenoid valve (s) performs (perform) the gear changes at extremely low impact motion characteristics. Blocking is not provided.
61
Shift solenoid valve 2-3 The solenoid valve (s) performs (perform) the gear changes at extremely low impact motion characteristics. Blocking is not provided.
62
Shift solenoid valve 3-4
63
The blocking solenoid valve Gear shifting is performed normally. Blocking is not provided.




« previos page
Self-diagnostic system
next page »
Diagnostic connector

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.