REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
			Technical data
			Search and definition of malfunctions
			The table of fast diagnostics
			Self-diagnostic system
			Fault codes
			Diagnostic connector
			Cleanup operation
			Testing of teamwork of an automatic transmission and the engine for the motionless car
			Testing time lag
			Testing of pressure transmission fluid
			Testing for the pressure reduced by the valve
			Check of level and a liquid condition in an automatic transmission
			Leaks of a liquid from an automatic transmission
			The accelerator cable
			Mode Switch
			Brake light switch
			The temperature sensor Transmission Fluid ATF
			Check the resistance of the pulse generator
			Solenoid valves
			Removal of an automatic transmission
			The general recommendations about transmission dismantling
			Dismantling of an automatic transmission
			Check and adjustment of preliminary loading of bearings
			Assembling automatic transmission
			Installation of an automatic transmission
			Oil radiator
			Disk Drive
			Check of work and adjustment of position of the selector lever
			Lever
			Repair of the selector lever
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

Lever

1 - front console;
2 - a bolt;
3 - a nut;
4 - the selector lever;

5 - insulator;
6 - a clip;
7 - a spring pin;
8 - a cable of the selector.

Removal, check and installation

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Removal of the lever of the selector spend in the sequence shown.
3. Check the details and, if necessary, repair or replace them.
4. Install in the reverse order of removal.
5. Move the selector lever to position P.
6. Pull the selector lever to him.
7. Click on the selector lever against the position P and hold it in this position.
	8. Tighten the selector lever cable. The inhaling moment: 7,9-10,7 N ??? m