printable version
Testing time lag
While the engine is idling at a frequency when the lever movement to select the neutral position before the operation is felt, should take place in real time. Testing time delay - a checking of N-D, 1-2, and N-R battery, the forward clutch and single-loop, clutches, brake tape 2-4 gear shift and brake for low-speed and reverse. Preparation
Follow the training provided in the section "Testing of teamwork of an automatic transmission and the engine for the motionless car" Testing
PERFORMANCE ORDER | 1. Start up the engine. | 2. Check the engine speed of the engine idling. Specifications:
The frequency of rotation of the crankshaft of the engine idling: 800 ?� 50 min -1 Ignition timing (BTDC): 10 ?� 1 ?� (Contact TEN of a diagnostic socket is earthed) | 3. Move the selector lever from the position "N" to the position "D" .Sekundomerom measure the time from the moment the lever to trigger transmission. | 4. Stopwatch to measure the time from the lever to trigger transmission. | A warning Engine operation for at least one minute at idling speed transmission fluid cools and prevents deterioration of its properties.
| 5. With the engine running, move the selector lever to position N and leave the engine running at idle speed for at least one minute. | A warning Perform three tests on each mode, and calculate the average value of the time delay.
| 6. Similarly swipe tests when moving the selector lever in the following positions:
a. at position N> D; b. at position N> D (hold mode of transmission); c. at position N> R Time delay: position N> D 0,5-1,0 with position N> R 0,5-1,0 with |
| Evaluation test for the delay time
Condition | possible cause | Switch N - D | More than the specified value | Insufficient pressure in the line Slippage forward clutch 1 one-way clutch slip Slip one-way clutch 2 | Less than the specified value | Improper battery life N-D Excessive pressure in line | Switch N - D (HOLD TRANSFER) | More than the specified value | Insufficient pressure in the line Slippage forward clutch Slippage brake tape 2-4 1 one-way clutch slip | Less than the specified value | Improper battery life 1-2 Excessive pressure in line | Switch N - R | More than the specified value | Insufficient pressure in the line Slippage brake for low speed and reverse Slip clutch reverse | Less than the specified value | Improper battery life N-R Excessive pressure in line |
|