add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Clarus
Home
 
Kia
Clarus
Maintenance
Engines FE DOHC and DOHC T8
Greasing system
Cooling
The power supply system and release
Fuel system
Ignition system
Coupling
Manual transmission
ACP G4A-EL
Technical data
Search and definition of malfunctions
The table of fast diagnostics
Self-diagnostic system
Fault codes
Diagnostic connector
Cleanup operation
Testing of teamwork of an automatic transmission and the engine for the motionless car
Testing time lag
Testing of pressure transmission fluid
Testing for the pressure reduced by the valve
Check of level and a liquid condition in an automatic transmission
Leaks of a liquid from an automatic transmission
The accelerator cable
Mode Switch
Brake light switch
The temperature sensor Transmission Fluid ATF
Check the resistance of the pulse generator
Solenoid valves
Removal of an automatic transmission
The general recommendations about transmission dismantling
Dismantling of an automatic transmission
Check and adjustment of preliminary loading of bearings
Assembling automatic transmission
Installation of an automatic transmission
Oil radiator
Disk Drive
Check of work and adjustment of position of the selector lever
Lever
Repair of the selector lever
AKP 50-40 LE
Axes and power shafts
Steering
Wheels and tires
Suspension
Body
The air conditioning system
Electrical equipment
Brakes
Electric schemes
 


Hit Counter by Digits


print page printable version

Mode Switch



Check

PERFORMANCE ORDER
1. Press the mode switch when the ignition switch and check whether the lights symbol "PWR" on the display mode.
2. At malfunction, check the voltage at the terminals of switch connector.

Check voltage

PERFORMANCE ORDER
1. Remove the rear console.
2. Turn on the ignition.
3. Check the voltage at the terminals A (LG) and C (W) the desired value.
Mode Switch
Continuity
Najat
AT*
Released
Less than 1.5

B *: Battery voltage
4. If pressure on contacts differs from demanded values, check for continuity.

Check for continuity

PERFORMANCE ORDER
1. Unplug the connector from the mode switch.
2. Check for continuity between terminals A (LG) and C (W).
Mode Switch
Continuity
Najat
0
Released
X




« previos page
The accelerator cable
next page »
Brake light switch

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.