add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 323 (1985 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 323
Home
 
Mazda
323
Introduction
Gasoline engines
Engine oil
Engine cooling system
Ignition system
The power supply system, the carburettor, fuel injection system
Diesel engine
Exhaust
Coupling
Manual gearbox
Automatic Transmission
Suspension and steering system
Brakes
Wheels and tires, a body, car coloring, care of the car
Dimensions of wheels and tires / tire pressure
Legend drives
Legend tires
Changing wheels
Rules of care of tires
Wheel balancing
Anti-skid chains
Spare wheel
Tyre wear
Body
Removing and installing front bumper
Removing and installing rear bumper
Removing and installing radiator grille
Removing and installing side moldings
Removal and installation of a forward wing
Removing and installing / adjustable hood
Removing and installing / adjusting a back door
Removing and installing / door adjustment
Upholstery doors / windows / glass doors
Removing and installing door trim
Removal and installation of glass / window of the front door
Castle / handle / door lock cylinder
The door lock of a back / internal drive
Outside Mirror
Removal and installation of glass mirrors
The dashboard / center console
The front seats
Removing and installing rear seat
Backseat
Painting car
Repair damage caused by stones
Auto Body / repair of rusty apertures
Preparation for painting
Colouring
Car wash
Care lacquered
Underbody protection and preservation of cavities
Care of an upholstery
Electrical system
Heater, illumination system, devices
Controls and operation receptions
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Car wash



In many areas, car wash outdoors is prohibited.


PERFORMANCE ORDER

  1. Dirty car wash as soon as possible.
  2. Traces of dead insects removed before washing the car.
  3. Use large amounts of water.
  4. Use a soft sponge or very soft brush.
  5. Do not direct a jet of water on the paint.
  6. Rinse off the softened dirt from the top down.
  7. Frequently rinse the sponge.
  8. For drying, use a soft skin.
  9. Use only good brand detergent. Thoroughly rinse the car with clean water to remove any residual detergent.
  10. To protect the paintwork at the washing water can be added preservative.
  11. If you use detergent preservation must be done more often.
  12. Never wash and dry the car in the open sun. Otherwise, in the lacquer coating is inevitable stains.
  13. Most exposed to salt flanges and crevices of doors and hood. Therefore, these places are at each sink, and also after an automatic sink should be thoroughly cleaned with a sponge and dry skin or wiped.

After washing slightly reduced braking effects. Therefore it is necessary to dry the brake discs. Insects, oil and bitumen is not always possible to remove a sink. Such contamination should be removed as soon as possible, otherwise they may cause damage to varnish. Then these parts should be made preservation.





« previos page
Colouring
next page »
Care lacquered

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.