add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 323 (1985 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 323
Home
 
Mazda
323
Introduction
Gasoline engines
Engine oil
Engine cooling system
Ignition system
The power supply system, the carburettor, fuel injection system
Diesel engine
Exhaust
Coupling
Manual gearbox
Automatic Transmission
Suspension and steering system
Brakes
Wheels and tires, a body, car coloring, care of the car
Dimensions of wheels and tires / tire pressure
Legend drives
Legend tires
Changing wheels
Rules of care of tires
Wheel balancing
Anti-skid chains
Spare wheel
Tyre wear
Body
Removing and installing front bumper
Removing and installing rear bumper
Removing and installing radiator grille
Removing and installing side moldings
Removal and installation of a forward wing
Removing and installing / adjustable hood
Removing and installing / adjusting a back door
Removing and installing / door adjustment
Upholstery doors / windows / glass doors
Removing and installing door trim
Removal and installation of glass / window of the front door
Castle / handle / door lock cylinder
The door lock of a back / internal drive
Outside Mirror
Removal and installation of glass mirrors
The dashboard / center console
The front seats
Removing and installing rear seat
Backseat
Painting car
Repair damage caused by stones
Auto Body / repair of rusty apertures
Preparation for painting
Colouring
Car wash
Care lacquered
Underbody protection and preservation of cavities
Care of an upholstery
Electrical system
Heater, illumination system, devices
Controls and operation receptions
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Removal and installation of glass / window of the front door



Withdrawal

PERFORMANCE ORDER

  1. Remove the interior door trim.
  1. Lower the glass until the glass mounting bolts will not appear in the cutout of the frame.
  1. Unscrew the open window from the window, to let go of the 2 bolts.
  1. Tilt the glass forward and pull the door out of the mine.
  1. Loosen the bolts on the plate door window. In the power window in addition to disconnect the electrical wires. Take out the windows of the lower cutout of the frame.

Setting

PERFORMANCE ORDER

  1. Insert the windows in the door and screw it. If you want to connect and install the plug in the power window picture position.
  1. Insert the glass in the door to the lift and tighten 2 screws. Typically, the glass door handling is not required.
  2. In the power window to connect the plug, if it is not connected.
  3. Install the door trim.




« previos page
Removing and installing door trim
next page »
Castle / handle / door lock cylinder

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.