printable version

Care lacquered

Preservation

As often as required, completely washed up and dried up varnish covering should be borne preservative to protect the surface from the effects of weathering and closes the pores of water-repellent layer of wax.

Transfused fuel, oil, grease or brake fluid must be removed immediately, otherwise it will lead to a change in color. Preservation should be repeated if the water is not reflected from the varnish and drains large drops. Regular canned preserves original luster for a long time.

Another possibility is the preservation of lacquer - is the use of preservatives in the sink. Washing preservatives protect the varnish, if they are used at each sink, and washing is carried out at least once every 2 - 3 weeks. Use only preservatives containing synthetic waxes or Carnauba wax.

Polish

Polishing is necessary only if the paint has acquired as a result of inadequate care nondescript appearance due to exposure to dust, industrial gases, the sun or the rain. And shine is not achieved greater use of preservatives. It is to warn against the use of highly abrasive or strong chemical polishing agents, even if the first experience was a success. Before each polishing the car should be completely washed and dried thoroughly. The rest should be guided instruction on use of polishing agents.

The treatment should be done in small areas to avoid premature drying of the polishing paste. Some polishing tools should be preserved. Do not polish in direct sunlight! Matt surfaces should not be canned or polished.

Elements of the vehicle of light alloys do not require special care.

Stain removal resin

The spots of the resin in a short time and then erode paint can not be removed completely. Fresh stains can be removed with benzine and a soft cloth. In a pinch you can use the gasoline from the tank with kerosene or turpentine. It cleans stains preservative resin varnish. When using this tool, no need for subsequent washing.

Removal of insects

Traces of insects contain substances that may damage the varnish film if them quickly not to remove. Firmly glued, they are not removed by just water and a sponge, and must be washed off with mild soapy water. There are also special tools to remove traces of insects.

Remove drops of building materials

Drops any building materials to wash with a weak solution of neutral detergent. Rub lightly, otherwise you can scratch the paint. After washing, rinse thoroughly with clean water.

Care polymeric parts

Plastic parts, artificial leather seats, ceiling, glass lamps and a matt black parts are cleaned with water and shampoo, not wet ceiling. If you want to handle the polymer resin parts cleaners. In no case do not use solvents such as Universal Nitro Thinner, cold cleaner or gasoline.

Cleaning the glass

Clean the glass windows on the outside and inside a clean, soft cloth. If heavily soiled help alcohol and warm water or a special glass cleaner. When cleaning the windshield wiper tilt forward. When cleaning the windscreen should also be cleaned and wiper blades.

When using silikonosoderzhaschih tools brushes, sponges and rags used for cleaning varnish should not be used for cleaning windows. When the coating of lacquer means silikonosoderzhaschimi windows must be closed with cardboard or other material.

Care of rubber consolidations

From time to time, the rubber seals should be talcum powder coated or silicone spray. This eliminates squeaks and noise when closing the doors. The noise also eliminates the corresponding rubbing surfaces with soap.

Cast light wheels handle special cleaner especially in the winter, however, do not use aggressive, acidic cleaners at temperatures above + 60 ?� C.

Seat belts are cleaned only mild soap when installed, not dry-clean, as this destroys the foundations. Automatic pull belts only when dry and, if necessary, treated with a special spray to facilitate cutting away. Do not dry the belt at a temperature above + 80 ?� C or in direct sunlight.