printable version

Underbody protection and preservation of cavities

All the bottom, including the rear wheel arches, covered with a protective paste. Especially dangerous areas in the front wheel arches are protected from being hit by stones polymer lockers. All cavity coated with a special wax. Because corroded body parts made of galvanized iron. Before the start of the winter season and after cleaning the bottom of the protective layer should be checked and, if necessary, update it.

In the fields of rotation and the bottoms may be deposited dust, clay and sand. Removal of accumulated dirt, to which is added the winter and salt plays an important role.

Preservation of the engine compartment

To prevent corrosion of the car (the sidewalls, spars or panels) and the drive unit including the engine compartment there are elements of the brake system and the front suspension and steering system must be covered with an effective preservative wax. First of all, of course, after washing the engine.

Before washing the engine must be covered with a generator and brake fluid reservoir with plastic bags. Generator bearings are protected from water, but the purification of the risk that the bearings will be put out of fat-dissolving agents. The consequences could be negative effects, such as noise or bearing failure. After applying the wax to clean and lubricate the hinges of the paste of MoS 2.