- Adjustment is carried out loosening bolts hinges and moving doors. The hinges have holes larger than the diameter of the mounting bolts, t. E. Hinge can be shifted.
 | - To adjust the gap joints loosen the bolts on the body (first or second-pillar), do not remove them. On vehicles with a 9/85 on 9/89 MY. Adjust the door so that it is parallel and equidistant from the surrounding body parts.
|
 | - Align the door along the contour of the body: If the door is in a closed state is not flush with the body, loosen the bolts on the door hinges and thus shift the door. The rear door can be placed on the front of the front door for a maximum of 1 mm.
|
- In the rear area of the door needs to be adjusted wedge the door. To do this, loosen the locking wedge, so that you can move the light hammer blows of the polymer. Close the door and align. Then carefully open the door and tighten the two screws firmly wedge 25 Nm. To be able to control the displacement wedge circle marker.
- If the door is perfectly located in the closed position, tighten the bolts hinges with 25 Nm torque.
|
|
