add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 323 (1985 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 323
Home
 
Mazda
323
Introduction
Gasoline engines
Engine oil
Engine cooling system
Ignition system
The power supply system, the carburettor, fuel injection system
Diesel engine
Exhaust
Coupling
Manual gearbox
Automatic Transmission
Suspension and steering system
Brakes
Wheels and tires, a body, car coloring, care of the car
Dimensions of wheels and tires / tire pressure
Legend drives
Legend tires
Changing wheels
Rules of care of tires
Wheel balancing
Anti-skid chains
Spare wheel
Tyre wear
Body
Removing and installing front bumper
Removing and installing rear bumper
Removing and installing radiator grille
Removing and installing side moldings
Removal and installation of a forward wing
Removing and installing / adjustable hood
Removing and installing / adjusting a back door
Removing and installing / door adjustment
Upholstery doors / windows / glass doors
Removing and installing door trim
Removal and installation of glass / window of the front door
Castle / handle / door lock cylinder
The door lock of a back / internal drive
Outside Mirror
Removal and installation of glass mirrors
The dashboard / center console
The front seats
Removing and installing rear seat
Backseat
Painting car
Repair damage caused by stones
Auto Body / repair of rusty apertures
Preparation for painting
Colouring
Car wash
Care lacquered
Underbody protection and preservation of cavities
Care of an upholstery
Electrical system
Heater, illumination system, devices
Controls and operation receptions
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Rules of care of tires



Tires are the so-called "memory" and careless handling - for example, fast or frequent moving through obstacles - leading to their premature failure.

Clean buses

If possible, do not clean the tires steam jetting apparatus. If the steam jet nozzle apparatus is lifted too close, the rubber layer will be destroyed in a short time, and the application of cold water. Purified thus the tire must be replaced for safety reasons.

They should be replaced such as tires, which had prolonged contact with oil or grease. The tire is pressed in these locations but then receives the previous form and the outside looks intact. However, the tire load capacity is greatly reduced.

Storage of tires

Tires should be stored in a cool, dark and dry place. They should not be in contact with oil or grease.

Keep the wheels should be in lying down or hanging up in the garage or basement.

Before removing the wheel should increase tire pressure (about 0.3 - 0.5 bar).

For winter tires use their discs, remount the tire on the same disc is not appropriate for reasons of cost.

Running tires

New tires have a very smooth surface. So is the new tires also applies to spare kolesu- should be run. When running-surface tires becomes due to wear rougher. In the first 300 kilometers with new tires need to drive very carefully, particularly on wet roads.





« previos page
Changing wheels
next page »
Wheel balancing

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.