REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	C-class
		Introduction
		Maintenance
		Engines
		Lubrication system
		Cooling
		Heating and ventilation
		Ignition system
		Fuel system
			Fuel System Description
				Introduction
				Fuel tank
				Fuel Level Sensor
				Fuel pump
				Fuel filter
				Air filter
				The transverse tube of the air filter
				Intake manifold
				Throttle cable / throttle lever (DB)
				Cable Throttle (DB)
				The contour of the diesel engine fuel
				Preheating diesel
				Fuel thermostat
				Hydraulic valve housing
				Throttle cable / throttle lever (DD)
				Cable Throttle (DD)
			PETROL INJECTION
			The injection system of diesel engines and power
			EXHAUST
			Transmission
			Manual and automatic gearbox
		Chassis
		Steering
		Brakes
		Body
		Electrical

printable version

Air filter

GAS ENGINE

Withdrawal

PERFORMANCE ORDER

1. The engine capacity of 1.8 liters and 2.0: Loosen the clamp (4/8) and remove the air filter (4) air hose.

2. Engines of 2.2 and 2.8 liters: remove the air filter (4) flow meter with the air hose, pre-opening clamp on the tube of the air filter. Check for damage to the O-ring.

3. Remove the inlet pipeline (4/16).

4. Pull out the air filter from the rubber feet (arrow) and remove it.

Setting

PERFORMANCE ORDER

1. Air filter with retention projections insert the rubber feet (arrows). Fit the inlet pipe (4/16).

2. The engines of 1.8 and 2.0 liters: Fit the air filter on the air hose and fix its collar.

3. Engines of 2.2 and 2.8 liters, insert Meter O-ring and fix its collar attachment.

DIESEL ENGINE

Withdrawal

PERFORMANCE ORDER

1. Remove the spring clip from the hose coming from the expansion tank with the coolant to the air filter.

2. Remove the air hose from the air filter after loosening the clamp and sliding back.

3. Remove the suction inlet.

4. Remove the rubber feet from the air filter and remove it.

Setting

PERFORMANCE ORDER

1. Insert the rubber feet the air filter with the guide pin.

2. Push the suction inlet.

3. Slide the air filter in the air hose coming from the expansion tank with the coolant to the air filter.

« previos page
Fuel filter

next page »
The transverse tube of the air filter