1. Disconnect from the terminals of the battery ground cable (-). A warning This erased anti-theft radio code.
|
2. Reduce the vapor pressure of the fuel for that briefly open the filler cap of the fuel tank. |
3. Remove the protective cover (69), noting his pre-assembly position. |
4. Remove the clips from the inlet (53) and discharge (52) pipes, as well as the breather hose (66) with standard hose clamps. Label the tubes with adhesive tape for easy installation. |
5. Remove the fuel pump pressure line with a banjo bolt. Remains of spilled fuel, wipe with a cloth. |
6. Remove the inlet hose after loosening the hose clamp. |
7. Remove the protective covering of the floor of the trunk. |
8. Remove the protective cover of the well and the cable protective mat. |
| 9. Disconnect shtekkernoe connection to the fuel pump and bring it across the floor of the trunk. To do this, squeeze the rubber grommet. |
10. Disconnect the spring clamp on the holder the power cord. |
11. Remove the ventilation hose (66), after loosening the hose clamp (66a). |
12. Remove the inlet fuel line (53), after loosening the hose clamp (53a). |
13. Remove the adapter (57) the bolt (57/1). |
14. Remove the fuel pump (M3m1). |