1. Press the banjo bolt to the thermostat, if damaged, replace the O-ring. |
2. Set the thermostat. |
3. Thread the hollow bolt. |
4. Screw the screws (86/1) (13a). |
5. Slide the fuel, if damaged, replace the O-ring. |
6. Pull the fuel feed line and fix its collar. |
7. Push the water feed pipe and secure it with a clamp. |
8. Install the glow plug cylinder 3. |
9. Install the intake line. |
10. Connect the terminal of the battery ground cable. |
11. Set the time on the clock. |
12. Enter the anti-theft code for the radio. |
13. Start the engine and leave it to rotate at idle. Check the tightness of all connections. |
14. Check the coolant level, if necessary add it. |